01-13-2011, 11:13 AM
LeNeve Wrote:Brampton, have you ever taken a torsion bar off a 1999 expedition? I'm changing the transfer case, and I need to get the right hand torsion bar off. It is stuck in the lower a-arm, big time. I've used the torch, and an air hammer, it won't move at all.You don't need to remove the torsion bars to get it out. Undo the tension off of the bars (which I assume youve done) then undo the transfer case.
the case should come out, might be a pain, but you can get it out. If you have to hammer and heat the lower arm, the assembly is probably gonna need to be replaced if you get it loose. its gonna take a lot of material with it.