Posts: 14,641
Threads: 239
Joined: Apr 2009
Reputation:
-1
Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back?
I'm a juggernaut of awesomeness
Posts: 11,871
Threads: 41
Joined: Apr 2009
Reputation:
0
Brampton Wrote:all this commercial did was make me dislike Hyundai, and hyundai drivers :poke: :finger:
Posts: 49,240
Threads: 290
Joined: Apr 2009
Reputation:
-22
Derick Wrote:LeNeve Wrote:yep, you could have knocked a weight off or something. But it doesn't take much of a hit to knock a wheel out of balance, or bend something else suspension wise. it doesnt pull at all, just a thumpity thumpity noise, that goes away around 35-40
the camber might be off or something. I don't really know shit about suspensions though. I just fix the broken pieces, then send it over to the quick lane shop, and they do the fine tuning.
Posts: 21,385
Threads: 211
Joined: Apr 2009
Reputation:
0
Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back? I would do a simple front to back on the side of the noise.
Posts: 18,066
Threads: 469
Joined: Apr 2009
Reputation:
1
Brampton Wrote:all this commercial did was make me dislike Hyundai, and hyundai drivers :poke:
This is true. I can't stand Pete anymore.
Posts: 21,385
Threads: 211
Joined: Apr 2009
Reputation:
0
LeNeve Wrote:Derick Wrote:LeNeve Wrote:yep, you could have knocked a weight off or something. But it doesn't take much of a hit to knock a wheel out of balance, or bend something else suspension wise. it doesnt pull at all, just a thumpity thumpity noise, that goes away around 35-40
the camber might be off or something. I don't really know shit about suspensions though. I just fix the broken pieces, then send it over to the quick lane shop, and they do the fine tuning. camber wont cause a noise issue, noises will be tire, or bearing related.
Camber is a wear issue and can cause the vehicle to drift if bad enough
Posts: 21,385
Threads: 211
Joined: Apr 2009
Reputation:
0
Joe Wrote:Brampton Wrote:all this commercial did was make me dislike Hyundai, and hyundai drivers :poke:
This is true. I can't stand Pete anymore. :roflmao:
Posts: 21,385
Threads: 211
Joined: Apr 2009
Reputation:
0
Brian Wrote:Brampton Wrote:all this commercial did was make me dislike Hyundai, and hyundai drivers :poke: :finger: :high5:
Posts: 49,240
Threads: 290
Joined: Apr 2009
Reputation:
-22
Brampton Wrote:Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back? I would do a simple front to back on the side of the noise.
I concur.
Posts: 49,240
Threads: 290
Joined: Apr 2009
Reputation:
-22
Brampton Wrote:LeNeve Wrote:Derick Wrote:LeNeve Wrote:yep, you could have knocked a weight off or something. But it doesn't take much of a hit to knock a wheel out of balance, or bend something else suspension wise. it doesnt pull at all, just a thumpity thumpity noise, that goes away around 35-40
the camber might be off or something. I don't really know shit about suspensions though. I just fix the broken pieces, then send it over to the quick lane shop, and they do the fine tuning. camber wont cause a noise issue, noises will be tire, or bearing related.
Camber is a wear issue and can cause the vehicle to drift if bad enough
yeah, you are right.
Posts: 18,066
Threads: 469
Joined: Apr 2009
Reputation:
1
Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back?
If Brampton did the work then I'm guessing something is about ready to fall off.
Posts: 14,641
Threads: 239
Joined: Apr 2009
Reputation:
-1
Brampton Wrote:Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back? I would do a simple front to back on the side of the noise. i will try this over the weekend when I have time
I'm a juggernaut of awesomeness
Posts: 21,385
Threads: 211
Joined: Apr 2009
Reputation:
0
Joe Wrote:Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back?
If Brampton did the work then I'm guessing something is about ready to fall off. :thanks:
Posts: 11,871
Threads: 41
Joined: Apr 2009
Reputation:
0
Joe Wrote:Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back?
If Brampton did the work then I'm guessing something is about ready to fall off. :roflmao: but seriously....ouch.
Posts: 49,240
Threads: 290
Joined: Apr 2009
Reputation:
-22
Joe Wrote:Derick Wrote:Brampton Wrote:sometimes its not visible to see a shifted belt. Have you rotated the tires to see if the noise changes place? i have not done that. tires are brand new as of thankgiving (just info). which way do i want to rotate these, side to side, front to back?
If Brampton did the work then I'm guessing something is about ready to fall off.
oh snap. :roflmao: :roflmao:
|