Thursday 1/16/14... Someone needs to start this - Printable Version +- Dudebro Nation (https://dudebronation.com/forum) +-- Forum: DudeBro Nation (https://dudebronation.com/forum/forumdisplay.php?fid=3) +--- Forum: Daily Threads (https://dudebronation.com/forum/forumdisplay.php?fid=4) +--- Thread: Thursday 1/16/14... Someone needs to start this (/showthread.php?tid=2985) |
Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 its 8am, get this shit on Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 btw, date #2 coming shortly with super hottie Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 this is for T http://www.buzzfeed.com/regajha/things-that-people-with-big-boobs-can-simply-never-do Re: Thursday 1/16/14... Someone needs to start this - LeNeve - 01-16-2014 SERVICE PROCEDURE 1.Is your dealer located in Canada? a.Yes - replace the affected door latch per Workshop Manual (WSM), Section 501-14. The Canadian Essential Special Service Tool (ESST) is under development. b.No - proceed to Step 2. Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 WTF is step 2 Re: Thursday 1/16/14... Someone needs to start this - LeNeve - 01-16-2014 Derick Wrote:WTF is step 22.Remove the affected door latch. Refer to WSM, Section 501-14. a.Use Integrated Diagnostic System (IDS) to identify the suspect door. then use some weird special tool they sent us, to "electrically cleanse" the door latch. Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 Re: Thursday 1/16/14... Someone needs to start this - LeNeve - 01-16-2014 the special tool kind of looks like that thing the ghostbusters used to suck ghosts out of the air, and trap them. Re: Thursday 1/16/14... Someone needs to start this - LeNeve - 01-16-2014 step 2 is funny. :roflmao: :roflmao: Re: Thursday 1/16/14... Someone needs to start this - Derick - 01-16-2014 Re: Thursday 1/16/14... Someone needs to start this - LeNeve - 01-16-2014 not that thing. the thing they slid across the floor Re: Thursday 1/16/14... Someone needs to start this - LeNeve - 01-16-2014 apparently its called The Muon Trap. weiurrff Re: Thursday 1/16/14... Someone needs to start this - Chip - 01-16-2014 Phase 3 is profit. |